Epson EB-W06 Service Manual

EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 156 Revision A
3.6.3.3 Replacing the Optical Engine
This section describes how to repair when the optical engine is broken.
Engine replacement workflow
PREPARING A GOOD ENGINE
1. Preparing a good engine for replacement
 Prepare a good Optical Engine belonging to the same model group as
the current MA Board for replacement.
 Write down the serial number (11digits) on the label attached on the
Optical Engine.
(Continued on the next page)
END
Check in advance (P.154)
PREPARING A GOOD ENGINE (P.156)
Obtaining the DR data (P.157)
REPLACING THE ENGINE (P.157)
Writing the DR Data (P.157)
Take care not to mistake the numbers such as "6" for "5"
because of the font used for the serial number of the
Optical Engine. Some numbers are easily mistaken.
Serial number of the Optical Engine

Epson EB-W06 Specifications

General

Contrast Ratio	16, 000:1
Weight	2.5 kg
Projection System	3LCD
Aspect Ratio	16:10
Projection Ratio	1.30 - 1.56:1
Screen Size	33 inches - 320 inches
Projection Lens F Number	1.49 - 1.72
Projection Lens Focal Length	16.9 - 20.28 mm
Projection Lens Focus	Manual
Security	Kensington lock, Password protection
3D	No
Resolution	WXGA (1280 x 800)
Brightness	3700 lumens
Lamp Life	12000 hours (Eco)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Connectivity	HDMI, VGA, USB
LCD Panel	0.59-inch with MLA (D10)
Lamp	UHE, 210 W
Zoom	Factor: 1.2
Noise Level	37 dB (Normal)
Dimensions	302 x 237 x 82 mm (Width x Depth x Height)
Power Consumption	0.3 W (Standby)