Preparing
20
When using a commercially available HDMI cable
Connecting Smartphones or Tablets
You can connect MHL compatible smartphones or tablets.
Use a commercially available MHL cable to connect the micro USB port of smartphones and tablets to the
HDMI1/MHL port on the projector.
The connected smartphone or tablet begins charging when images are projected.
Attention
•
Be sure to use an MHL compatible cable for making connections. If a cable that does not meet the MHL
standards is connected, the smartphone or tablet could generate heat, cause a liquid leak, explode or generate
other conditions that could result in a fire.
•
If you connect using a commercially available MHL-HDMI conversion adapter, charging the smartphone or
tablet may not work or you may not be able to perform operations using the projector's remote control.
c
•
When using a lot of power, such as when playing a movie, you may not be able to charge.
•
This projector will not charge devices in standby mode or when the battery in a smartphone or tablet
is depleted.
Connecting USB Devices
You can connect USB devices such as USB memories, and USB compatible digital cameras.
Using the USB cable supplied with the USB device, connect the USB device to the USB (TypeA) port on the
projector.
When the USB device is connected, you can project image files on the USB memory or digital camera as a
slideshow.
s
p.50
When you have finished projecting, remove USB devices from the projector. For devices with a power switch,
make sure you turn them off before disconnecting the USB device.
To Next Page
Loading...
Need help?
General
