Configuration Menu
65
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Dynamic, BrightCinema, Natural, Cinema, 3D Dy-
namic, 3D Cinema
Select a color mode based on your sur-
roundings and the image you are projec-
ting.
s p.33
Brightness
Adjusts the brightness when the image
appears too dark.
Contrast
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tion
Adjusts the color saturation for the im-
ages.
Tint
Adjusts the tint for the images.
Sharpness
Adjusts the image sharpness.
Color Temp.
Color Temp. Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.
Customized
Adjusts the offset and gain for each R, G,
and B color.
Frame Interpo-
lation
*1
Off, Weak, Normal, Strong
(This can only be set when Image Pro‐
cessing is set to Fine.)
Adjusts the smoothness of movement of
the image.
Image En-
hancement
*2
Image Preset Mode Off, Preset 1 to Preset 5 Select the settings prepared in advance as
the settings for Noise Reduction, MPEG
Noise Reduction, and Detail Enhance‐
ment.
Noise Reduction
(This can only be set when Image Pro‐
cessing is set to Fine.)
Adjusts the roughness of the image.
MPEG Noise Reduction
Smoothes out rough images in MPEG for-
mat.
Detail Enhancement
Creates a more emphatic texture and ma-
terial feel of the image.
To Next Page
Loading...
Need help?
General
