Adjusting the Image
34
Choices when projecting 3D images
Mode Application
3D Dynamic
Images are bright and sharper than 3D Cinema.
3D Cinema
Produces crisper colors than 3D Dynamic.
Switching the Screen Between Full and Zoom (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projected
image.
The available settings vary depending on the image signal currently being projected.
Press the button to displays menus in the following order.
Signal - Aspect
Use the
buttons to select the item, and then
press the
button to confirm the selection.
c
You may not be able to change the Aspect depending on the signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
The table below shows the image projected on a 16:9 screen.
Input Image Setting Name
Normal Full Zoom
4:3 Images
16:9 Images
When projecting 16:9 images, Full and Zoom cannot be
selected.
Images Recorded Using
Squeeze
Letterbox Images
*
To Next Page
Loading...
Need help?
General
