Using the Projector on a Network (EH-TW5350 Only)
62
c
On your mobile device, start the Intel WiDi software.
You see a list of available devices.
d
Select the projector's Display Name from the list.
e
If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the
Screen Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your mobile device.
c
It may take some time until the connection is established. While connecting, do not disconnect
the projector's power cord. Doing so may cause your device to freeze or malfunction.
Projecting Using the Miracast Function
If your mobile device such as a smartphone supports Miracast, you can connect it to the projector wirelessly
and project images.
You can play audio through the projector's speaker system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings on your projector as necessary.
s
p.59
b
Press the button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
c
On your mobile device, use your Miracast function to search for the projector.
You see a list of available devices.
d
Select the projector's Display Name from the list.
To Next Page
Loading...
Need help?
General
