Configuration Menu
70
*
Bluetooth audio devices are not supported in some countries and regions.
Extended menu
Function Menu/Settings Explanation
Home Screen
Home Screen Auto
Disp.
On, Off Selects whether or not to display the Home
screen automatically when the projector turns
on. The Home screen is not displayed when the
selected source has an image signal when the
projector turns on.
Custom Function 1 Power Consump-
tion, Auto Iris, Key-
stone, Info
Select the function assigned to the Home screen.
Custom Function 2
Display
Messages On, Off Sets whether or not to display the following mes-
sages (On or Off).
•
Item names for image signals, color modes, and
aspect ratios.
•
If the internal temperature is rising when no im-
age signal is being input or an unsupported sig-
nal is detected.
Display Background Black, Blue, Logo Selects the screen status when no image signal
is being input.
Startup Screen On, Off Sets whether or not to show a startup screen
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on how the pro-
jector is installed.
Operation
Direct Power On On, Off You can set up the projector so that projection
starts as soon as the power cord is plugged in
without any button operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the power cord is still plugged
into the projector.
Sleep Mode On, Off If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When in standby mode,
press the
button on the remote control or
the control panel to start projection.
Sleep Mode Timer 1 - 30
Sets the interval for Sleep Mode.
Illumination On, Off
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
High Altitude Mode On, Off
Set this to On if you are using the projector above
an altitude of 1500 meters.
Auto Source Search On, Off
Set to On to detect the input signal automatically
and project images when there is no input signal.
To Next Page
Loading...
Need help?
General
