Preparing
22
b
Use the buttons to select On, and then press the button to confirm the
selection.
c
Turn on "pairing mode" on the Bluetooth device you want to connect to.
See the documentation supplied with the Bluetooth device for more information.
d
Select Search Bluetooth Device.
A list of available devices is displayed.
e
Use the buttons to select the Bluetooth device you want to connect to, and
then press the
button to connect.
The next time you turn on the projector, it automatically connects to the last device it connected to.
To change the connected device, repeat the procedure from step 3.
c
•
When Audio Out Device is set to AV System, audio cannot be output from Bluetooth audio devices.
To output audio from Bluetooth audio devices, set Audio Out Device to Projector.
s Settings -
HDMI Link - Audio Out Device p.68
•
There is a delay in the audio output from any Bluetooth audio devices.
Bluetooth specifications
Version
Bluetooth Ver. 3.0
Output
Class 2
Communication dis-
tance
Approx. 10 m
Supported profiles
A2DP
Content protection
SCMS-T
Frequency used
2.4 GHz band (2.402 to 2.480 GHz)
To Next Page
Loading...
Need help?
General
