Epson ELPWP20 - Registering Digital Certificates from a Web Browser

You can register digital cert
icates on the base unit to provide security for your
presentation les.
You can also register digital cert
icates in the base unit's Network menu.
However, be sure to register only once or the certicate may not install
correctly.
s Network > Network Settings > Wireless LAN > Client Certicate
s Network > Network Settings > Wireless LAN > CA certicate
s Network > Network Settings > Projector Control > Secure HTTP >
Web Server Certicate
a
Make sure your digital cert
icate le is compatible with the base unit.
b
Make sure the base unit is turned on.
c
Start your Web browser on a computer or device connected to the
n
et
work.
d
Go to the Epson Web Control screen by entering the base unit's IP address
in
t
o the browser's address box.
You see the Epson Web Control screen.
e
Select A
dvanced.
•
Yo
u may need to log in before you see the Advanced screen. If
you see a log in window, enter your user name and password.
(e user name is EPSONWEB. No password is set by default.)
•
You can change the password in the base unit's Network menu.
s Network > Network Settings > Web Control Password
f
Under N
etwork, select Certicate.
g
S
elect the cert
icate le you want to register.
h
Enter the password in the Pass
word box, and then click Send.
Registering Digital Cer
ticates from a Web Browser
76