Epson EMP-TW1000 User Manual

4-27
EMP-TW1000
SEIKO EPSON Revision:A
C A U T I O N
 Attach EMI Suppressors on top of the MA board following the instructions
below.
1). Attach the EMI Suppressor on the ICs (1) while matching the centers as
shown in Figure 4-24.
2). Attach two EMI Suppressor; C on top of each other on the IC (2) while
matching the centers as shown in Figure 4-24.
3). Attach two EMI Suppressor on top of each other while aligning them
along the standard line as shown in Figure 4-24.
Figure 4-24.
EMI Suppressor
EMI Suppressor; C
(1)
(2)
(3)
standard line

Epson EMP-TW1000 Specifications

General

Brand	Epson
Model	EMP-TW1000
Category	Projector
Language	English