Epson EMP-TW1000 User Manual

4-33
EMP-TW1000
SEIKO EPSON Revision:A
C A U T I O N
Handle with care! The FPCs of EMP-TW1000 are very thin and fragile. Do not
bend the FPCs forcibly. Since the ICs are mounted on the FPCs, strong bending
may cause the ICs to peel off or breaking of the FPCs.
 If the heat-resistant tape on the FPC(s) comes off, replace it with new one.
When replacing the tape, align it following the standard as shown in Figure 4-
31.
Figure 4-31.
 Attach the EMI Suppressor; A onto the outside of each FPC (R/G/B) as shown
in Figure 4-32.
Figure 4-32.
heat-resistant tape
FPC
Light Valve
30mm
standard line
EMI Suppressor; A
FPC

Epson EMP-TW1000 Specifications

General

Brand	Epson
Model	EMP-TW1000
Category	Projector
Language	English