Epson SC-T5100 User Manual

Settings item Settings value
Thick Paper O, Accept
Bidirectional Accept, O
PC Connection via USB Enable, Disable
USB I/F Timeout Setting 0.5 to 300 sec
Network Settings (Details of each item U “General Settings - Network Settings” on page 127)
Wi-Fi Setup
Router
Connect via Wi-Fi When wireless LAN connection disabled: Display Connect via Wi-Fi
menu
When wireless LAN connection connected: Display connection
status and settings information
Wi-Fi Setup Wizard
Push Button Setup(WPS)
Others
PIN Code Setup(WPS)
Wi-Fi Auto Connect
Disable Wi-Fi
Wi-Fi Direct
Wi-Fi Direct When Wi-Fi Direct disabled: Display Wi-Fi Direct wizard
When Wi-Fi Direct enabled: Display settings information and
number of connected devices
Change Password
Disable Wi-Fi Direct
Delete Registered Device
Wired LAN Setup Start Setup
(Displayed when connected to a wireless LAN.)
Network Status
Wired LAN/Wi-Fi Status Display current connection settings
Wi-Fi Direct Status
Print Status Sheet Print
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
105

Epson SC-T5100 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Memory	1 GB
Operating Systems	Windows, macOS
Print Technology	PrecisionCore MicroTFP
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Paper Sizes	A4, A3, A2, A1, B4, B3, B2, B1
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	ESC/P Raster
Display	4.3-inch color LCD touchscreen
Print Speed Draft Mode	22 sec/A1 on plain paper
Media Types	Plain Paper, Matte Paper, Tracing Paper, Fine Art Paper, Photo Paper, Coated Paper
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)