Epson SC-T5100 User Manual

Settings item Settings value Explanation
Custom Paper Setting
(Touching any of registry number 01 to 10 will display settings items.)
Change Name Register and change the name of the custom paper settings. The
name registered here is displayed in the Paper Type list.
Touch this to display the keyboard screen. Up to 20 characters may
be input for the name. The keypad screen can be switched as
shown below with the button marked.
Touch the icons at bottom left to switch between input methods.
ABC: Enters alphabet letters
123#: Enters numbers and symbols
To change the key layout of the full keyboard, use Keyboard in the
Basic Settings menu.
U “General Settings - Basic Settings” on page 115
Change Reference
Paper
Plain paper
*
You can select the media type that is the closest to the paper you
are using.
Matte Paper
Photo Paper
CAD
Others
Advanced Media Setting
Platen Gap 1.6 This is the Platen Gap (distance between print head and paper) for
the paper selected in Change Reference Paper, therefore this
does not normally need to be changed. Change to a wider setting
(a higher value) if print results are smeared.
2.1
2.6
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
118

Epson SC-T5100 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Memory	1 GB
Operating Systems	Windows, macOS
Print Technology	PrecisionCore MicroTFP
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Paper Sizes	A4, A3, A2, A1, B4, B3, B2, B1
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	ESC/P Raster
Display	4.3-inch color LCD touchscreen
Print Speed Draft Mode	22 sec/A1 on plain paper
Media Types	Plain Paper, Matte Paper, Tracing Paper, Fine Art Paper, Photo Paper, Coated Paper
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)