Epson SC-T5100 User Manual

Settings item Settings value Explanation
Oversize The position at which the margin is added depends on the base
output size setting, as shown below.
❏ When set to Auto
Adds the value selected for page margin (area of
in the
following illustration) outside the hard clip area of the PS
command of the data (area of
in the following
illustration).
❏ When set to a standard size or user
dened
size
Adds the value selected for page margin (area of
in the
following illustration) outside the size selected for base output
size (area of
in the following illustration). With the actual
output size, the margin section becomes larger than the
selected size (the area of
in the following illustration).
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
121

Epson SC-T5100 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Memory	1 GB
Operating Systems	Windows, macOS
Print Technology	PrecisionCore MicroTFP
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Paper Sizes	A4, A3, A2, A1, B4, B3, B2, B1
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	ESC/P Raster
Display	4.3-inch color LCD touchscreen
Print Speed Draft Mode	22 sec/A1 on plain paper
Media Types	Plain Paper, Matte Paper, Tracing Paper, Fine Art Paper, Photo Paper, Coated Paper
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)