Epson SC-T5100 User Manual

C
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Adjustment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no dierence between two adjacent
patterns and you are unsure which is the best
one to choose, enter the numeric value that
comes between them. For example, if you are
unsure whether to enter pattern 0 or 2, enter 1.
D
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of
#2 in the same way as for #1 and then touch
Adjustment #3.
E
Enter the numeric value of the pattern with the
most visible straight line among the adjustment
patterns of #3 and then touch Adjustment #4.
In the following example, pattern 0 has the
most visible straight line so you would enter 0.
If there is no dierence between two adjacent
patterns and you are unsure which is the best
one to choose, enter the numeric value that
comes between them. For example, if you are
unsure whether to enter pattern 0 or 2, enter 1.
F
Enter the numeric value of the pattern with the
most visible straight line among the adjustment
patterns of #4 in the same way as for #3.
G
Tou ch OK.
Printing of the second set of adjustment
patterns starts. For cut sheet smaller than A2
size, load the second sheet of paper.
c
Important:
When using A2 size or larger cut sheet, or
using roll paper with the auto cut turned o,
the part with the
rst
set of patterns printed
on it is pulled inside the printer in order to
print the second set of patterns. Do not touch
the paper with your hands.
H
Enter the numeric value of the pattern with the
least streaks among the printed adjustment
patterns of #1 and then touch Adjustment #2.
In the following example, pattern 0 has the least
streaks so you would enter 0.
I
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of
#2 in the same way as for #1 and then touch
Adjustment #3.
J
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of
#3 and then touch OK.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no dierence between two adjacent
patterns and you are unsure which is the best
one to choose, enter the numeric value that
comes between them. For example, if you are
unsure whether to enter pattern 0 or 2, enter 1.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Loading and Setting the Paper
44

Epson SC-T5100 Specifications

General

Brand	Epson
Model	SC-T5100
Category	Printer
Language	English