❑
Make sure the paper stack fits under the edge guide tab
and the arrow mark, both of which are located on the
inside surface of the left edge guide. Basic loading capacity
for special media is explained below.
EPSON 360 dpi
Ink Jet Paper and Photo
Quality Ink Jet Paper
You can load paper up to the
arrow mark. If you load legal-size
ink jet paper, do not load it more
than halfway to the arrow mark.
EPSON Photo Quality
Ink Jet Cards
You can load up to 30 index
cards. Always place the included
support sheet under the cards
when loading them.
EPSON Photo Quality
Glossy Paper
You can load up to 20 sheets.
EPSON Photo Quality
Glossy Film
For best results, you should load
glossy film one sheet at a time. If
you wish to load multiple sheets of
glossy film, load only up to 30
sheets and set the minimum top
margin of the page to 30 mm.
Before loading glossy film,
always put a support sheet* or a
sheet of plain paper under the
glossy film. Be sure to remove
each printout from the output
tray immediately after printing.
Before stacking or storing your
printout, allow enough time for
the ink to dry throughly and
except for A6 size glossy film
cover the printed side of every
sheet with an enclosed protective
sheet.
6
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 6
05-20-97 DR, pass 0
Printing on Special Paper
6-3
To Next Page
Loading...
Need help?
General