EPSON Ink Jet
Transparencies
You can load up to 10
transparencies. Always put a
support sheet* or a sheet of plain
paper under the stack of
transparencies. You also need to
reposition the paper support. See
page 6-8. Be sure to remove each
printout from the output tray
immediately after printing.
Before stacking or storing your
printout, allow enough time for
the ink to dry throughly and
cover the printed side of every
sheet with an enclosed protective
sheet.
EPSON Photo Quality
Adhesive Sheets
You can load one sheet at a time.
Envelopes You can load up to 10 envelopes.
*If a support sheet is packed with the paper, load it underneath the paper,
but do not print on it.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 6
05-20-97 DR, pass 0
6-4
Printing on Special Paper
To Next Page
Loading...
Need help?
General