Print speed is not what you expect.
Cause What to do
The image resolution and the
amount of color used in the
document may be too high.
Carefully considering your use of
color and resolution can help you
optimize your printing times. For
more details, see “Increasing the Print
Speed” later in this chapter.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
Something on the page is wrong or missing.
Cause What to do
An unknown problem has
occurred.
Disconnect the interface cable from the
computer; then try the printer
operation check described earlier in
this chapter.
The printer settings within
your application are
incorrect.
Adjust the printer settings within your
application and print again.
The interface cable is not
plugged in securely.
Check that the cable is securely
connected to the printer and the
computer.
The print head moved to the ink cartridge replacement
position unexpectedly.
Cause What to do
The
R
cleaning button was
pressed while the
B
or
A
light
was flashing or on.
One or both of the ink cartridges is
low or out of ink. Replace the ink
cartridges as described on page 7-2.
8
Troubleshooting
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
Troubleshooting
8-13
To Next Page
Loading...
Need help?
General