Special paper was loaded
without the support sheet or
a regular sheet of paper
under it. Index cards, glossy
film, glossy paper, and
transparencies should be
loaded with the support sheet
or a piece of plain paper
under them.
Load the support sheet or a piece of
plain paper under the special paper.
See Chapter 6, “Printing on Special
Paper,” or the instructions packed
with your paper.
Multiple sheets of EPSON
Photo Quality Glossy Film
are loaded.
Load glossy film one sheet at a time
with the loading support sheet or a
piece of plain paper under it.
If you need to load multiple sheets of
glossy film, load only up to 30 sheets
with the loading support sheet or a
piece of plain paper under them and
set the top margin of the page to
30 mm or more.
Ink has leaked on the platen. Wipe the inside of the printer as
shown below with a soft, clean cloth.
w
Warning:
Be careful not to touch the gears inside the
printer.
ill
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
8-18
Troubleshooting
To Next Page
Loading...
