Epson Stylus color 600 User Manual

The print head nozzles are
clogged.
Clean the print head. See “Cleaning
the Print Head” later in this chapter.
White horizontal lines appear in the printed image.
Cause What to do
The print head nozzles are
clogged.
Clean the print head. See “Cleaning
the Print Head” later in this chapter.
One of the ink cartridges is
low on ink.
Check the control panel to confirm
that the
B
or
A
ink out light is flashing,
and replace the appropriate ink
cartridge.
The MicroWeave option in
your printer driver is not
selected.
Turn on MicroWeave in your printer
driver.
The Media Type setting in
your printer driver is
incorrect.
Make sure the Media Type setting
matches the type of paper loaded in
the printer.
Vertical printed lines do not align.
Cause What to do
The print head is misaligned. Align the print head with the Print
Head Alignment utility. See “Aligning
the Print Head” later in this chapter.
The printing position is
misaligned.
Make sure the High Speed option in
your printer driver is not selected.
8
Troubleshooting
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
Troubleshooting
8-19

Epson Stylus color 600 Specifications

General

Brand	Epson
Model	Stylus color 600
Category	Printer
Language	English