Printing quality is not what you expect.
Cause What to do
The paper loaded is not the
paper selected in your
application or the printer
driver.
Make sure you loaded the correct
paper in the printer and that you
selected the same media type in your
application and/or the printer
software.
Make sure you are using paper that
meets the paper requirements for this
printer. See “Paper” in Appendix C.
You are not printing on the
correct side of the paper.
Check the paper packaging for the
correct side for printing; then load the
printable side of the paper face up in
the sheet feeder.
The printer driver settings are
not correct.
Check the printer driver settings to
make sure they are appropriate. If
these settings are correct, check your
application because some settings are
overridden by application settings.
Also, for more information on making
printer driver settings, see online help
for Windows, or Chapter 5 for
Macintosh.
The High Speed setting is
selected in the printer driver.
To obtain higher quality output, make
sure High Speed is not selected.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
8-20
Troubleshooting
To Next Page
Loading...
Need help?
General