Colors are different than you expect.
Cause What to do
The color print head nozzles
are clogged.
Clean the print head. See “Cleaning
the Print Head” later in this chapter.
Black ink is selected in your
printer driver.
Set the Ink setting to
Color
.
The paper is not loaded
printable side up.
Check that the printable side of the
paper is facing up.
The Media Type setting does
not match the paper loaded.
Change the Media Type setting in
your printer driver to match the type
of media you have loaded.
Load media that matches the Media
Type setting you selected in the
printer driver.
The ICM (Windows) or
ColorSync (Macintosh)
setting in your driver is not
appropriate for your
document.
Select
Automatic
as the Mode setting
in the printer driver.
Your printer and monitor are
not properly calibrated for
color matching.
See the user’s guides of your
image-editing software and your
monitor for information on calibrating
your system for color matching.
Since monitors and printers
produce colors differently,
printed colors will not always
match on-screen colors
perfectly.
See Appendix B , “Tips for Color
Printing”.
8
Troubleshooting
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
Troubleshooting
8-21
To Next Page
Loading...
Need help?
General