7. Press the
R
cleaning button then close the printer cover.
The printer moves the print head and begins charging the
ink delivery system.
Note:
Even if you do not press the
R
cleaning button, the printer
moves the print head and begins the ink charging process about
60 seconds after you install the cartridges.
The ink charging process takes about five minutes to complete,
during which time the printer produces a variety of
mechanical sounds. These sounds are normal. When the ink
delivery system has been charged, the print head returns to
its home (far right) position.
c
Caution:
During the ink charging process, the
P
power light
flashes. Never turn off the printer while the
P
power light
is flashing.
The life of a cartridge depends on the amount of text and
graphics you print. The life of a color ink cartridge depends on
the amount and the number of colors used in your documents.
Note:
When ink runs out, see “Replacing an Ink Cartridge” in Chapter 7.
Now you are ready to connect the printer to your computer. To
connect the printer to your PC, see the following section. To
connect it to your Macintosh, see page 2-21.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 2
05-29-97 DR, pass 0
2-10
Getting Started
To Next Page
Loading...
