7. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Depending on the country, the
CD-ROM may contain multiple-language versions of the
printer software.
First try typing
D:\Win95
and clicking
OK
. If an error
message does not appear, proceed to step 8. If an error
message does appear, you have the multiple-language
version and you need to click
OK
to return to the Install
From Disk screen. Type
D:\
then specify your preferred
language by typing
English
,
Francais
,
German
,
Italian
,
Portugal
, or
Spanish
, followed by
\Win95
. Click
OK
. (If
your CD-ROM drive uses a drive letter other than “D”,
substitute the appropriate letter.)
If you use the floppy disk version, insert it in a disk drive. If
the drive you are installing from is displayed on the screen,
click
OK
. Otherwise, change the drive letter in the
Copy
manufacturer’s files from
box and click
OK
.
8. At the next screen you can type a unique name for the printer
in the Printer name box. We recommend that you keep the
model name as shown. The program will copy the files to
your hard disk and add an icon to the Printers folder using
the printer name you assign. To use this printer as the
default printer for Windows 95 applications, select
Yes
. (
No
is the default setting.)
9. Click the
Finish
button.
The printer software that controls your printer is now installed.
For information on accessing and using the software, see
Chapter 3, “Printing With Windows.”
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 2
05-29-97 DR, pass 0
2-16
Getting Started
To Next Page
Loading...
Need help?
General