Epson Stylus Color 980 Service Manual

EPSON Stylus Color 980 Revision A
Troubleshooting Overview 98
Table 3-35. Combination which Causes the Error
For this reason, if you perform the operation in an incorrect
procedure such as; Head replacement
→
I/C replacement
→
Turning
on the printer, the printer starts monitoring the temperatures before
the printhead ID on the board is replaced with a new one, then
shows the error consequently. On the other hand, if you follow the
proper steps; Head replacement
→
Turning on the printer
→
proper
I/C replacement with a new one, the program allows a data transfer
once before printing so you can overwrite the printhead ID.
Nozzle Selector 1st digit of the Head ID
The board is in the Sharp-
specific setting.
0
EPSON exclusive printhead 1

Epson Stylus Color 980 Specifications

General

Brand	Epson
Model	Stylus Color 980
Category	Printer
Language	English