Epson Stylus Color 980 - CRHP Sensor Removal; PE Sensor Removal

EPSON Stylus Color 980 Revision A
Disassembly and Assembly Disassembly Procedures 121
4.2.7.7 CRHP Sensor Removal
1. Remove the printer mechanism. (See Section 4.2.2.)
2. Pushing two of the four hooks securing the CRHP sensor, remove
the CRHP sensor.
Figure 4-37. CRHP Sensor Removal
4.2.7.8 PE Sensor Removal
1. Remove the printer mechanism. (See Section 4.2.2.)
2. Release the hook securing the PE sensor at the back of the printer
mechanism, and remove the PE sensor.
Figure 4-38. PE Sensor Removal
CRHP Sensor
Push the hooks.
PE sensor