Epson Stylus Color 980 Service Manual

EPSON Stylus Color 980 Revision A
Adjustment Adjustments 133
5.2 Adjustments
This section describes the procedure for each adjustment. Be sure to
observe the CAUTION and tables in Section 5.1.1 before starting
adjustments.
5.2.1 Preliminary Operation
Perform the preliminary operation, which is required prior to actual
adjustment operation, by following the steps below.
1. Connect the PC and printer with PRIF4.
2. Turn the printer on.
3. Launch the service program (SC980.EXE) attached to the service
manual for the Stylus Color 980.
4. The following screen appears.
Figure 5-1. Screen after Start-up Sequence
5. Select the name of the model you have connected.
NOTE:
 If we OEM this product in future, there will be a possibility that
more model names are added to the option. In this case, be sure
to select the model name you are dealing with correctly.
 The command required to write adjustment value for each
adjustment includes a model-unique parameter, which is called
R-code. The purpose of selecting the model name is to define
the parameter which is specific to the model.
6. Select the printer port you use.
7. Select the destination which applies to the model on which you are
making adjustments.
8. Select “Individual Adjustment Service Program”.
9. The following screen appears.
Figure 5-2. Preliminary Operation Screen

Epson Stylus Color 980 Specifications

General

Brand	Epson
Model	Stylus Color 980
Category	Printer
Language	English