Epson Stylus Color 980 Service Manual

EPSON Stylus Color 980 Revision A
Maintenance Overview 152
6.1.1.1 Cleaning the Printhead
If your printout shows problems such as white banding, color banding,
dot missing, or improper ink ejection (bad alignment), the printhead
needs to be cleaned. The cleaning methods equipped with the Stylus
Color 980 are as shown in Figure 6-1.
Figure 6-1. Printhead Cleaning Options
CAUTION
If printing results get worse all the more you repeat
cleaning, it is assumed that the ink cartridge has run
out the ink and the ink consumption counter is upset
due to a user’s mishandling the ink cartridge. In this
case, enter the ink cartridge replacement sequence
and replace the installed ink cartridge with a new one.
Level 1
Level 2
Level 3
Yes
No
C leaning M ethod
C leaning using
the control panel
Press the
C leaning B utton
Perform cleaning
according to the
C L counter.
R un a self-test.
C leaning using the
In itia l In k C h a r g e .
R e s e t th e in itia l in k c h a r g e
flag in the program .
Turn the printer off.
Turn the printer back on to
perform Initial Ink C harge.
R un a self-test.
END
C leaning using
the program
Perform cleaning
w ith th e fo rc ib le C L 2 .
Select "C leaning"
in the program .
R un a self-test.
C L2 (pow erful) is
alw ays used for the
cleaning.
Is th e
problem
solved?
Is th e
problem
solved?
Is th e
problem
solved?
END
END
Yes
Yes
No
No

Epson Stylus Color 980 Specifications

General

Brand	Epson
Model	Stylus Color 980
Category	Printer
Language	English