1-4
Paper Handling
❏
If the paper is curled, flatten it or curl it slightly toward the
opposite side before loading it. Printing on curled paper may
smear your printout, especially when printing with
Maximum
selected as the Printable Area setting.
❏
If ink smears on your documents when printing on thick
media, set the adjust lever to the “+” position. To set the adjust
lever, open the printer cover and position the lever as shown
in the illustration.
Note:
❏
Return the adjust lever to the “0” position before printing on
media of normal thickness. Leaving the lever in the “+” position
may cause gaps in the printed image.
To Next Page
Loading...
