Epson Stylus CX4300 - Page 36

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450 Revision A
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 36
Table 3-5. Error Indications and Fault Occurrence Causes
Printer Status Maintenance Request Fatal Error (Mechanism)
Indications
Power On Blink
Ink On Blink
Paper On Blink
Status monitor 3
message
Fault
Occurrence
Cause
This error is detected when the Waste Ink
Counter exceeds the preset counter value.
This error is detected when it is
determined that the printer cannot operate
properly. (CR error, PF error, etc.)
Reference Page
“5.2.3 Waste Ink Pad Counter” (p.XXX)
(T.B.D.).
Table 3-12, “Check point for fatal error
according to each phenomenon,” on
page 47