Stylus Pro 4880 Field Repair Guide 1/17/08
Printer Component, Software Item, LCD Display, Printer Button Page 10.
PF BiD Adjust: (+/- n) (?)
Uni-D Trap: (On, Off) (?)
Display: Address: (Used for displaying data at specific RAM addresses)
Custom: (?)
Life: CR Motor, PF Motor, CR+PF Motor, Roller, Roller Rel, D/E Chg, Hopper, ASFLoad, Cutter, Head U/D,
Head Lock, Cleaning, Print, Total Life, CR+PF+Fire, TotalLife2, TotalLife3, Check (Used for design testing
of these devices and assemblies)
Service Config
MD TBL: ID = (1-7D Hex) (“Modifying parameter of media table is available”)
Clear Counters (Clears the usage/life counter information for the following devices/operations)
CUTTER REPL: EXEC
Init All: EXEC(Initializes all counters in this menu)
NVRAM: EXEC
RTC: (YY/MM/DD/HH): EXEC
Cutter: EXEC
CR Motor: EXEC
CR Total: EXEC
PF Motor: EXEC
Head: EXEC
Cleaner: EXEC
Total Pages: EXEC
SPONGE: EXEC (Sponge = Boarderless Pads)
ASF: EXEC
FEED ROLLER: EXEC
PG: EXEC
CR UNIT MAINT: EXEC
CL UNIT MAINT: EXEC
HEAD MAINT: EXEC
To Next Page
Loading...
