Stylus Pro 4880 Field Repair Guide 1/17/08
T&B&S [Roll Paper] Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 187.
T&B&S [Roll Paper] Adjustment
Note: This function sets the top, bottom, and side margins for roll paper.
1. Load 17” Enhanced Matte roll paper.
2. From the Adjustment Wizard for the Pro 4880, select the T&B&S [Roll Paper].
1. Click on the Print button.
2. The Printer will print out this pattern, and mea-
sure the Multi Sensor Left, and the Multi Sensor
Right values using the Multi Sensor.
3. Measure the top (leading edge) margin, and
enter the value measured.
9. Click the Finish button.
4. Measure the bottom (trailing edge) margin, and
enter the value measured.
5. Measure the side margin (home position side),
and enter the value measured.
6. Enter the Multi Sensor Left value printed on the
print out, labeled “MS Left”.
7. Enter the Multi Sensor value printed on the print
out, labeled “MS Right”.
8. Click the Write button.
To Next Page
Loading...
