Pro 4880 Field Repair Guide 1/17/08
RTC & USBID Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 184.
RTC & USBID Adjustment
Note: The RTC & USBID Adjustment is used to write the correct time and USB ID to the Main Board.
Note: The Printer’s USB ID will be changed by this operation.
Note: Sometimes the Printer must be in Serviceman Mode for the RTC & USBID Adjustment to work.
1. From the Adjustment Wizard for the Pro 4880, select the RTC & USBID Adjustment.
2. Enter the Printer’s serial
number.
3. Click on the Write button
to send the data to the
printer.
1. Verify that the Date and Time
information is correct. It can be
adjusted if necessary.
To Next Page
Loading...
