Stylus Pro 4880 Field Repair Guide 1/17/08
Multi Sensor Auto PF Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 152.
Multi Sensor Auto PF Adjustment
Note: This adjustment automatically calibrates the Paper Feed mechanism.
1. Load 17” Enhanced Matte roll paper.
2. From the Adjustment Wizard for the Pro 4880, select the Multi Sensor Auto PF Adjustment.
1. Click on Run.
2. The Printer will print a test pattern. (It
takes about 15 minutes). While it is
printing, it is reading the test pattern
with the Multi Sensor and correctly
setting the Feed Length Adjustment.
3. Click on Finish when completed.
To Next Page
Loading...
