Stylus Pro 4880 Field Repair Guide 1/17/08
Wrong Ink Cartridge Printer Component, Software Item, LCD Display, Printer Button Page 134.
Wrong Ink Cartridge
Note: The Wrong Ink Cartridge error indicates that the Printer detects an Ink Cartridge that does not
match the Ink type expected.
1. Verify that the Maintenance Mode 2: Service Config: NPD value is set to the correct ink type.
2. Reset the Maintenance Mode 2: Service Config: NPD value.
2.1 Release the Ink Cartridges by raising the Ink Cartridge Release Lever.
2.2 Set the NPD value to 0.
2.3 Turn the Printer on, and lower the Ink Cartridge Release Lever.
2.4 The Printer will look at the Cartridge’s ink type and reset the Printer’s ink type to match.
3. The CSIC Contacts in the Ink Bay may cause this error.
4. A defective CSIC Chip or incorrect Ink Cartridge can cause the error.
4.5 Use the Maintenance Mode 1: CRTG INFO MENU: to look at the data on the CSIC Chip.
To Next Page
Loading...
