Stylus Pro 4880 Field Repair Guide 1/17/08
Adjustment Wizard2 Printer Component, Software Item, LCD Display, Printer Button Page 225.
Adjustment Wizard2
Note: The Adjustment Wizard will only run on a computer that has been registered with Epson.
Note: The Adjustment Wizard is the utility that enables electronic and mechanical alignments of the Pro
4880.
Note: The Adjustment Wizard will work when the Printer is in “Ready” mode, or in SERVICEMAN MODE.
Note: Serviceman Mode will allow the Adjustment Wizard to function with the Printer, when the Printer
is in an error condition.
1. Ensure that the Pro 4880 Printer Driver and Status Monitor 3 is installed on the system that will
be running the Adjustment Wizard2.
1.1 Verify that the Driver and Status Monitor 3 are functional, by opening the Driver and verifiying that Status
Monitor 3 can report on ink levels.
2. Create a folder and copy the Adjustment Wizard 2 files into it.
3. Double Click on Adjwiz2 to start the utility.
To Next Page
Loading...
