Epson Stylus Pro 4880 - Skew Check

Stylus Pro 4880 Field Repair Guide 1/17/08
Skew Check Printer Component, Software Item, LCD Display, Printer Button Page 185.
Skew Check
Note: This function checks the amount of skew the printer exhibits.
1. Load 17” Enhanced Matte roll paper.
2. From the Adjustment Wizard for the Pro 4880, select the Skew Check.
1. Click on the Run button.
2. The Printer will feed 1 meter of paper.
5. Click the Finish button.
3. The Printer measure the amount of
paper skew using the Multi Sensor,
and display the results.
4. Click on the OK button.