Epson Stylus Pro 4880 - Communication Errors PC

Stylus Pro 4880 Field Repair Guide 1/17/08
Communication Errors PC Printer Component, Software Item, LCD Display, Printer Button Page 113.
Communication Errors PC
Description:
Status Monitor 3 reports a Communication Error.
Reason:
The Printer and the Driver / Computer are not communicating.
Troubleshooting process:
1. Check the Printer’s Control Panel and verify.
1.1 The Printer is turned on.
1.2 The Printer is Ready (If the Printer displays Ink Out or a Service Required Error, the Printer is still
ready).
1.2.1 The Printer is not Paused.
1.2.2 No Error Lights or messages on the LCD.
2. Check the Printer Driver.
2.1 Is the Printer set as the Default Printer.
2.1 Is the proper Port assigned to the Printer.
2.2 Does the Port see the Printer.
3. Check the Printer’s settings.
3.1 Is the Printer’s proper Interface enabled.
3.1.3 If the Interface is set to Auto, try setting the Port to the connected type.