Stylus Pro 4880 Field Repair Guide 1/17/08
Service Procedure Printer Component, Software Item, LCD Display, Printer Button Page 219.
Service Procedure
Note: Because of the large amount of ink that some service procedures require, please use your Ink
and Waste Tank, not the customers.
1. Observe the customer’s service issue.
2. Update the firmware to the current version if necessary.
3. Clean the Carriage Rails with a dry cloth or paper towel
4. Clean the Cap, Wiper Blade, and Wiper Blade Cleaner.
4.1 Clean the Print Head Nozzle Plate if necessary.
4.1.1 Loosen the Carriage Belt
4.1.2 Remove the Carriage Mechanism and clean.
5. Clean and check the Borderless Pads.
6. Blow off the Multi Sensor
7. Repair the customer’s service issue.
8. Check the Print Head’s mechanical alignments
8.1 Perform the Print Head Slant Adjustment (CR)
8.2 Perform the Print Head Slant Adjustment (PF)
9. Perform the Multi Sensor Level Adjustment.
10. Perform the Multi Sensor Adjustment.
To Next Page
Loading...
