Stylus Pro 4880 Field Repair Guide 1/17/08
Glossary Printer Component, Software Item, LCD Display, Printer Button Page 211.
Pixilated: An image quality issue that is caused by a low-resolution image printed at high reso-
lution.
Platen Gap: The distance between the print head, and the printable surface.
Rippling: A term that refers to a condition caused by over saturated paper warping.
Saturation: The amount of ink applied to the printed surface.
Screening: The dot pattern placed on the printed surface to create and image. Also known as
dithering.
Skew: Crooked paper in the printer.
Smear: An image that has been rubbed by something, causing it to be deformed, or
smeared. The direction or any repetition of the smear should be noted.
Smudge: Something on the printed surface, that was not intended. Usually transferred to the
page because of contact with a dirty roller or the print head. Any repetition should be
noted and measured.
Sublimation Ink: Ink that is first printed on thermal transfer media, and then transferred using heat to
another surface.
Sympathetic Nozzle: A nozzle that is not intended to fire, firing in conjunction with an intended nozzle.
Tone: The specific shade of a color.
Under Saturation: Not enough ink has been applied to the printable surface to properly saturate the
media.
UN-sharp: “Fuzzy “qualities in an image usually caused by too much dot gain.
Vertical Banding, Irregular: Vertical bands perpendicular to the direction of print head movement, that are not lin-
ear. Usually created by paper “rippling”, caused by over saturation.
To Next Page
Loading...
