Stylus Pro 4880 Field Repair Guide 1/17/08
Damper Removal Printer Component, Software Item, LCD Display, Printer Button Page 50.
10. Disconnect the Print Head from the Damper Assembly.
11. Release the Interlock that corresponds to the Damper(s) to be replaced, and lift out the
Damper(s)
1. Disconnect the Print Head from
the Damper Assembly.
2. Hold the Damper Assembly like
this so that ink does not leak.
3. Place the Print Head off to the side
as shown.
Damper Interlock
To Next Page
Loading...
