Stylus Pro 4880 Field Repair Guide 1/17/08
Printer Component, Software Item, LCD Display, Printer Button Page 7.
Maintenance Mode 1: Press and hold the Pause button and turn on the Printers
HEX DUMP: PRINT EXEC (In this mode, the printer prints hexadecimal values received)
LANGUAGE: *ENGLISH, DUTCH, PORTUGUE, SPANISH, GERMAN, ITALIAN, FRENCH (Control panel lan-
guage)
Paper Counter: *Off, Roll, Sheet (Enables the tacking of Roll Paper usage, or count down from 250 Sheets
(full tray))
UNIT: *METER, FEET/INCH (Set’s the unit of measure that the printer displays)
4CMW72: *OFF, ON (?)
CUT PRESSURE: *100% (0%-150%) (Adjusts the Paper Cutter pressure)
SSCL: EXEC (Super Strong Cleaning)
ROLL PPR FEED: *OFF, ON (On saves leading edge paper)
DEFAULT PANEL: EXEC (Returns Maintenance Mode 1 settings to Factory Default)
CRTG INFO MENU: MANUFACTURER,COLOR, INK TYPE, INK CAPACITY, INK LEFT, PRODUCTION
DATE, EXPIRATION DATE, INK LIFE, INK AGE (CSIC
information, for each ink cartridge)
CUSTOM: 0-9 (Enabels custom modes)
7. NETWORK SETUP: (*DISABLE, ENABLE)
IP ADDRESS SETTING: AUTO, PANEL,
BONJOUR: *ON, OFF
INIT NETWORK SETTING: EXECUTE
5. MAINTENANCE
CUTTER REPL: EXEC
BK Ink Change: EXEC (For Changing between Matte
and Photo Black)
PWR CLEANING: N CLEANING Y
CLOCK SETTING: (mm/dd/yy hh:mm)
6. Head Alignment.
PAPER THKNS: *STD, (n.n)MM
ALIGNMENT: AUTO (UNI-D, #3, #2, #1, BI-
D All, BI-D 2-COLOR)
MANUAL (UNI-D, BI-D All, BI-
D 2-COLOR)
To Next Page
Loading...
