Stylus Pro 4880 Field Repair Guide 1/17/08
Input Roller Assembly Removal Printer Component, Software Item, LCD Display, Printer Button Page 77.
8. Lift the Right Side Air Duct exposing the 2 Screws noted in step 9.
9. Remove the 3 Screws that fasten the Input Roller Assembly to the Right Side Frame.
This is 1 of the 2 Screws
shown is the picture on the
left in step 9.
3 Screws
Back side of the
Waste Ink Tank Slot
Loosen this Screw.
To Next Page
Loading...
