Epson Stylus Scan 2000 Service Manual

EPSON Stylus Scan 2500
Revision A
Adjustment
Using the Service-Adjustment Program
122
Figure 5-4. Inital Menu
From the Startup menu you need to choose Head ID or Production depending on the
adjustment procedure you perform. See the table below for details.
The following table gives a list of adjustment that are available on the service-related
menus. Other menus and items are for production purposes only.
Table 5-4. Software-based Adjustment Procedures
Adjustment procedure See Then see
Input the head voltage
“Head ID Menu” on
page123
“Head Voltage ID Input” on
page128
Charge ink
“Production Menu” on
page125
“Initial Ink Charge Operation” on
page127
Adjust normal Bi-d “Bi-D Adjustment” on page127
Adjust variable Bi-d
Clean the printhead
“Head Cleaning Operation” on
page128
Drain ink “Ink draining” on page131
Reset EEPROM Special
Clear ink counter
Table 5-5. Service Menu Items
Menu name Operations available
Head ID Menu Input Head ID
Production Menu
n Input the head voltage
n Charge ink
n Adjust normal Bi-d
n Adjust variable Bi-d
n Clean the printhead
n Drain ink
Special
n Reset EEPROM
n Clear ink counter
Table 5-4. Software-based Adjustment Procedures
Adjustment procedure See Then see

Epson Stylus Scan 2000 Specifications

General

Brand	Epson
Model	Stylus Scan 2000
Category	All in One Printer
Language	English