Chapter 2 Setup
69
2
5
Start up the web browser on the PC for setting, and enter the printer’s IP
address printed on the status sheet in the address bar as shown below.
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
EPSON TMNet WebCon fig starts.
6
Select [Configuration], [Wireless], and then [TCP/IP].
The [TCP/IP Setting (Wireless)] screen appears.
7
Configure the printer’s network setting.
For details, see "TCP/IP Setting (Wireless)" on page 96.
8
Click [Submit].
9
Select [Configuration], and then [Wireless].
The [Wireless Setting] screen appears.
10
Configure security settings for the network.
For details, see "Security setting" on page 69 and "Wireless Setting" on page 95.
11
Click [Submit].
Security setting
Set the following items depending on the network mode.