vi Rev.D
Confidential
Always supply power directly from a standard domestic power outlet.
Handle the power cord with care. Improper handling may lead to fire or shock.
Do not modify or attempt to repair the cord.
Do not place any object on top of the cord.
Avoid excessive bending, twisting, and pulling.
Do not place cord near heating equipment.
Check that the plug is clean before plugging it in.
Be sure to push the prongs all the way in.
CAUTION:
Do not connect cables in ways other than those mentioned in this manual.
Different connections may cause equipment damage and burning.
Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or
cause injury if it falls.
Do not use in locations subject to high humidity or dust levels. Excessive humidity and
dust may cause equipment damage, fire, or shock.
Do not place heavy objects on top of this product. Never stand or lean on this product.
Equipment may fall or collapse, causing breakage and possible injury.
To ensure safety, please unplug this product prior to leaving it unused for an extended
period.
Do not touch the print head or the paper feed motor. Wait for the head and the motor
to cool. The head and the motor can be very hot after printing for a long time. Touching
them may cause burns.
Safety Precautions on Maintenance/Repair/Inspection
WARNING:
Be sure to use the designated type of fuse for the circuit board. Use of a different type
may result in fire.
Remove the power cord and all other cables from this product before disassembly or
reassembly to prevent electrical shock.
To prevent the possibility of electrical shock, do not perform maintenance, repair, or
inspection during a thunder storm.
To Next Page
Loading...
Need help?
General
