Epson TM-U675 - Revision Table

Revision Table i
Confidential
TM-U675/U675P(with autocutter) Service Manual
Revision Table
Rev. Page Description
Rev. A All pages Newly authorized
Rev. B 3-8 Changed the explanation for “Adjusting the Platen Gap.”
Reason for change:
Mistakes and missing information.
Rev. C 2-118
F-2
Added the parts “Ferrite core“ .
Reason for change:
To meet the EMC requirements.
H The explanation for the Appendix-H is moved to the other text ”tm-u675ac_eng_sm_revC”.
Reason for change
To cut the data capacity of the manual per one text by dividing the manual between two
texts.
Rev. D 2-24 Added the information how to solder the cables (carriage motor cable).
Reason for change
To use the parts in common with other models.
2-93 Added the information how to solder the cables (paper feed motor cable).
Reason for change
To use the parts in common with other models.