Appendix I-8 Printer Handling Rev.D
Confidential
Installing the Ribbon Cassette
To install the ribbon cassette for the first time or to replace a used ribbon, follow the steps below:
Note:
Be sure to turn on the power before installing a ribbon cassette.
1. Unpack the ribbon cassette and turn the knob in the direction shown to take up any slack.
Figure I-12 Turning the knob
2. Open the front cover of the printer, using the tabs on each side of the cover.
Figure I-13 Opening the front cover
3. Remove the old ribbon, if there is one.
knob
tab
To Next Page
Loading...
