Epson TM-U675 - Assembling the Mechanism Assembly (M-U675); Pre-Assembly Procedures; Pre-Assembly of the Validation Detector Assembly

2-2 Assembly and Disassembly Rev.D
Confidential
Assembling the Mechanism Assembly (M-U675)
Pre-assembly Procedures
Pre-assembly of the Validation Detector Assembly
1. Solder lead wires S, T, R to the validation circuit board.
Figure 2-1
697 Validation detector assembly
757 Lead wire (type R)
758 Lead wire (type S)
759 Lead wire (type T)