Epson TM-U675 - Assembly of the Mechanism

Rev.D Assembly and Disassembly 2-55
TM-U675/U675P (with autocutter) Service Manual
Confidential
Assembly of the Mechanism
1. Tighten two screws on the front of the main frame.
2. Attach the lever drive motor assembly to the main frame with two screws. Install so that the
label side of the lever drive assembly motor is facing the back.
Figure 2-55
726
Screw (C.B.S-tite F, 3X6)
Main frame
686 Lever drive motor assembly
773
Screw (C.B., 2.6X4)
726
Screw (C.B.S-tite F, 3X6)