Epson TM-U675 - Pre-Assembly of the MICR Unit

Rev.D Assembly and Disassembly 2-9
TM-U675/U675P (with autocutter) Service Manual
Confidential
Pre-assembly of the MICR Unit
Note:
Perform the following 16 steps only if your printer has a MICR unit.
1. Solder the MICR connector assembly lead wires to the MICR head.
2. Align the MICR frame and MICR head with the nib and attach with one screw.
Figure 2-8
782 MICR assembly
786
MICR connector assembly
792 MICR frame assembly
793
Screw (C.P.(S-P2), 2.5X5)